manualshive.com logo in svg

Krendl 4200-D, Руководство пользователя, Страница: 18 / 38

Поделиться
Скачать
Krendl 4200-D Скачать руководство пользователя страница 18

Rev. Date: 1/3/12

Page 15

MODEL #4200-D

Main Control Panel (lid closed)

Illustration 5

Main Control Panel (back)

Illustration 6

Electrical Operation:

NOTE: PRESS KILL SWITCH TO IMMEDIATELY STOP MACHINE AT ANY TIME!

1. Make sure Kill Switch is out by twisting clockwise/right.  (See illustration 5)
2. Turn 

red

 Main Disconnect Switch to ON position.  (See illustration 5)

3. Set 4-Position Selector Switch to OFF.  (See illustration 5)
4. Press 

green

 start Button.  

Machine will not run unless start button is pressed after Kill Switch

is out and red Main Disconnect Switch is on.

  (See illustration 5)

5. Select operating mode on 4-Position Selector Switch from one of the following options:

Remote:

Remote control hand pendant will control machine.

Off:

Machine will not run.  (overrides remote hand pendant)

Blower:

Only the blower will run continuously.  (manual control at machine)

Agitator-Feed/Blower:

Both the blower and the agitator-feed will run continuously.  (manual
control at machine)

Содержание 4200-D







































Отзывы:

Нет отзывов