Rev. Date: 1/3/12
Page 18
MODEL #4200-D
GENERAL MAINTENANCE
Your Krendl Model #4200-D Machine is designed to be used with minimal maintenance for all its
components. The following is only a guide; experience is the best guide for the right maintenance
schedule for you.
SAFETY NOTE
WHEN MAINTENANCE IS TO BE PERFORMED ON THE MACHINE ALWAYS:
1) STOP THE ENGINE COMPLETELY.
2) TURN THE IGNITION TO THE “OFF” POSITION AND REMOVE THE KEY.
NOTE:
When further maintenance is needed, please refer back to other manufacturer’s
manuals for additional assistance!
CHECK GUARDS
X
CHECK ENGINE FLUID LEVELS
X
CHECK DRIVE ALIGNMENT & TENSION
X
CHECK ENGINE EXHAUST HOSE
X
SERVICE ENGINE AIR CLEANER
CARTRIDGE & CLEAN ENGINE
X
COOLING SYSTEM
VISUALLY INSPECT COUPLING
ELEMENTS FOR FATIGUE CRACKS
X
(OVER 1/2”)
CLEAN BLOWER AIR FILTER
X
CHECK BLOWER OIL LEVEL
X
CHANGE ENGINE OIL
X
(needs to be changed after first 8 hours of operation and thereafter every 25 hours if operating
under high ambient temperature)
GREASE BLOWER BEARINGS
X
LUBRICATE DRIVE CHAINS WITH A DRY
LUBRICANT
X
GREASE SHREDDER, AIRLOCK,
AGITATOR, & JACK SHAFT BEARINGS
X
CHANGE BLOWER OIL
X
(needs to be changed after first 100 hours of operation and thereafter every 1000 hours)
DESCRIPTION
EACH SHIFT
40
200
1000
HOURS
HOURS
HOURS
Содержание 4200-D
Страница 29: ...Rev Date 1 3 12 Page26 MODEL 4200 D PARTS LIST 4200 D Exploded Parts View Unidirectional Center Down ...
Страница 30: ...Rev Date 1 3 12 Page27 MODEL 4200 D 4200 D Exploded Parts View ...
Страница 31: ...Rev Date 1 3 12 Page28 MODEL 4200 D 4200 D Exploded Parts View ...
Страница 38: ...Rev Date 1 3 12 Page35 MODEL 4200 D SERVICE RECORD DATE MAINTENANCE PERFORMED COMPONENTS REQUIRED ...