Kratki LEO Series, Инструкция по установке и эксплуатации

Страница: 40 / 64

40
Control
ATTENTION!!!
NOTE!!!
The remote control should always be kept out of the reach of children and
other person unaware, not capable of assessing the consequences of their
actions.
The user gets the device along with the included remote control, type B6R-H9 (Fig.
36).
Fig. 36. B6R-H9 remote control
ATTENTION!!!
NOTE!!!
The B6R-H9 remote control units have a built-in sensor used in the thermostat mode.
The unit continuously measures the ambient temperature and compares it with the
temperature set on the thermostat. It should be kept in a dark place, to rule out
measurement errors associated with direct sunlight.
NOTE!!!
Never use tools to change the position of knobs. Changing the position of the knobs
can only be made by hand, otherwise you may damage the controller. In the case of
locking the knobs, contact your service representative.
Gas Stove AB uses modern B6R-H9 remote controls set in accordance with the European
standard for radio frequency 868MHz. The remote control supplied with the stove requires a
new code transmission. To do it, in the fir
st place, press and hold the „RESET“ button on the
receiver until you hear two characteristic signals and then release the button. This operation
should be done by means of the thin element with blunt ends. Further on, from the remote
control, press and hold , until you hear two short beeps, indicating the remote control is
synchronized with the receiver. One long beep indicates that the elements of the system have
not been properly paired.