![background image](http://html.mh-extra.com/html/kramer/kds-8-mngr/kds-8-mngr_user-manual_2002070051.webp)
Kramer Electronics Ltd.
KDS-8-MNGR
– Using Embedded Web Pages
49
▪
Under USB, click
Settings
to view and change USB settings via the USB pop-up
window. Click
Save
to accept changes and exit window.
USB functionality is not supported by all SDVoE units.
Decoder Settings are configured.
Removing a Decoder
Only disconnected decoders can be removed.
To remove an encoder from the list:
1. In the Menu tabs, select
Receiver
. The Receiver page appears.
2. Click
Remove
. The Remove window appears.
3. Select a decoder from the list.
4. Click
Confirm
.
The selected encoder is removed from the list.
Defining Output Resolution
Set detected decoder output resolution via drag-and-drop control.
Since scaling applies only to the decoder side, a change in the resolution does not affect
bandwidth usage.
To define the output resolution:
1. In the Menu tabs, select
Scaling
. The Scaling page appears.
Figure 41: Scaling Page