Kramer Electronics Ltd.
KDS-8-MNGR
– Using Embedded Web Pages
26
Stopping Communication from a USB device
To stop communication from a USB device:
1. In the Menu tabs, select Monitor & Control. The Video page appears.
2. Click
USB
. The USB page appears.
3. Click and drag a USB device to the Stop button in the Device area.
Communication from USB device has stopped.
Routing IR Signals
Route IR inputs and outputs on detected encoders and decoders via drag-and Drop control.
The IR page includes two main areas. The:
•
IR Input
area, which includes drag-and-drop buttons for all the encoder IR input ports
that are detected by the system, and a stop button to stop IR streaming to the encoders.
•
IR Output
area, which includes drag-and-drop buttons for all the decoder IR output
ports.
Use IR page to perform the following actions:
•
Streaming Global Broadcast IR Inputs
•
•
Stopping IR Broadcast Streaming
Streaming Global Broadcast IR Inputs
To broadcast an IR input to all available IR outputs:
1. In the Menu tabs, select Monitor & Control. The Video page appears.
2. Click
IR
. The IR page appears.
Figure 17: Monitor & Control Tab
– IR Page
3. Click and drag an IR input button from the Input side to All on the Output side.