Kramer KDS-8-MNGR Скачать руководство пользователя страница 55

Страница: 55 / 72

Kramer Electronics Ltd.

KDS-8-MNGR

– Using Embedded Web Pages

▪

Scroll through the various predefined Multiview layouts to select the required
configuration (windows location and number) for the Multiview window.

Customized layouts are not currently supported.

▪

Set the Bezel Top/Bottom/Left/Right size in pixels.

We recommend that you use the same make and model for all displays within a
video wall to avoid bezel and panel size discrepancies.

4. Under Receiver, which lists all the available decoders, drag and drop each decoder to its

correct position within the video wall grid to the right of the list.
the name of the decoder is displayed within the selected location of the video

wall and

the display changes colors:

▪

Green

– the display is assigned to the video wall and is in video wall mode.

▪

Red

– the display is assigned but is not active/ in the correct mode.

▪

Blue

– no display has been assigned yet.

5. Click

Save Group

to save the changes to the current video wall configuration.

6. Click

Execute

to save the changes to the current video wall configuration and then

execute the changes. If the video wall is not already active, this action activates it.

Video wall is configured.

Содержание KDS-8-MNGR









































































Результаты поиска

Содержание KDS-8-MNGR

Отзывы:

Похожие инструкции для KDS-8-MNGR

Бренды по названию

Популярные бренды

Kramer KDS-8-MNGR, Руководство пользователя

Результаты поиска

Содержание KDS-8-MNGR

Отзывы:

Похожие инструкции для KDS-8-MNGR

Бренды по названию

Популярные бренды