Kramer KDS-8-MNGR Скачать руководство пользователя страница 19

Страница: 19 / 72

Kramer Electronics Ltd.

KDS-8-MNGR

– Using Embedded Web Pages

Stopping a Video Source Stream

You may need to stop one or all the video streams coming from a source.

To stop a video source stream:

1. In the Menu tabs, select Monitor & Control. The Video page appears.

2. Click

(Stop selection button) at the lower part of the transmitter area and cycle to the

required option:

▪

All Stop

stops all stream types from the selected source.

▪

Native Stop

stops only the full resolution primary video stream.

▪

Multiview Stop

stops only the secondary video stream used by multiviewer layouts.

3. Click and drag the source to the selected Stop button. Streaming from that source stops.

To stop a stream type from ALL video streams simultaneously, drag

All

down to the

All Stop button.

Source/s streaming has stopped.

Stopping a Video Display Stream

To stop a video display stream:

1. In the Menu tabs, select Monitor & Control. The Video page appears.

2. Click and drag the display to the Stop button.

3. Release the mouse. Streaming to that display stops.

Drag

All

button down to the Stop button to stop all streaming.

Display streaming has stopped.

Routing a Video Wall

Drag and drop detected encoder sources and decoder displays to control predefined video
wall routing in the system. Go to

Configuring Video Walls

on page

to define a video wall

group.

The Video Wall section includes three main areas. The:

•

Group

area, which includes all the currently defined video wall groups Click a group icon

to display a simplified graphical representation of the video wall on the video wall view
on the right side of the page. For example, Video Wall 1 group shows as Group: Video
Wall 1 on the right side of the Video wall section.

•

Transmitter

area, which includes all the available decoders.

•

Video wall view

area, representing the selected video wall.

Содержание KDS-8-MNGR









































































Результаты поиска

Содержание KDS-8-MNGR

Отзывы:

Бренды по названию

Популярные бренды

Kramer KDS-8-MNGR, Руководство пользователя

Результаты поиска

Содержание KDS-8-MNGR

Отзывы:

Бренды по названию

Популярные бренды