#SLA-60 R.8 March 2022
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
FACING AND FINISHING
21
4.2 Optional Trim Kit Assembly #SL60-FTK
For use ONLY with safety barrier #SL60-RSF.
IMPORTANT: This trim kit assembly must be attached before fireplace
installation.
1. Locate the pre-drilled holes on the fireplace face surrounding
the glass frame assembly. There are (5) holes above and (5) holes
below the fireplace opening, and (3) holes on each side.
2. Align the top and bottom trim panels with the pre-drilled holes
on the fireplace face. Position the flange on the trim panel as
pictured below. Secure with screws included in components
packet.
3. Align the left and right trim panels with the pre-drilled holes
on the fireplace face. Position the flange on the trim panel as
pictured below. Secure with screws included in components
packet.
Figure 4.4, Trim Kit Installation
