20
VENTING
7.0 VENTING
7.1 Rear Vent Conversion Instructions
IMPORTANT: This appliance has outlets for both top and rear
venting. The unused vent exit must have the cover plates in
place, and the cover plates must be removed from the exit
according to the instructions below to be used.
NOTE: All components removed from the top vent exit will be
reinstalled for the rear vent.
7.1.1 Remove Top Vent Collars
1
REMOVE (7) SCREWS SECURING COVER PLATE
2
REMOVE (4) SCREWS SECURING 6⅝” (168mm) COMBUSTION AIR
INTAKE COLLAR
3
REMOVE (6) SCREWS SECURING 4” (101mm) EXHAUST COLLAR
1
REMOVE (5) ATTACHMENT SCREWS SECURING
BACK COVER PLATE
2
REMOVE (4) SCREWS SECURING COMBUSTION
AIR INTAKE COVER PLATE
3
REMOVE (6) SCREWS SECURING EXHAUST
COVER PLATE
