OPerATING INsTrUCTIONs CONTINUeD
reMOTe CONTrOL FeATUres:
Failure Indicator Display:
Indicates a malfunction of the indoor room
temperature sensor
Indicates a malfunction of the evaporator
temperature sensor
Indicates a malfunction of the outdoor condenser
temperature sensor
Note:
When one of the above malfunctions occurs,
turn off the unit, and check for any obstructions.
Restart the unit, if the malfunction is still
present, turn off the unit and unplug the power
cord. Contact the manufacturer or its service
agents or a similar qualified person for service.
Indicates frosting protection (Turn off the unit and
restart it to return to normal operation).
The hand held remote control unit allows you to control
all operational aspects of your Air Conditioner, from
the convenience of your favorite armchair. Here are
some things you should know about operation your Air
Conditioner with the hand held remote control.
▲▼TEMP:
Increases / Decreases operating “TEMPERATURE”
only.
POWer:
Turns the power to the main unit “on/off “ only.
MODe:
Activates the “AUTO” (if applicable), “COOL”, ”FAN” or
“DRY” function.
TIMer:
Activates the “auto START” or “auto STOP” program
from 0 -12 hours (1 hour increments).
sLeeP:
Activates the “SLEEP” mode.
sWING:
Activates the automatic air “SWING” (vertical) louver
oscillation) feature.
FAN:
Activates the “FAN” speed settings (HIGH, MED,
LOW).
Batteries:
To operate the hand held remote control, you will
require two “AAA” 1.5 Volt batteries (included).
NOTE: Batteries should be replaced when:
a) No signal (beep) is heard from the main unit when
initiating program commands from the remote
control to the main unit.
b) The main unit does not respond to the remote
control program commands.
Battery replacement:
Activates the automatic air “SWING” (vertical) louver
oscillation) feature.
1) Slide the lower (battery) cover down (Located on
rear of remote control unit).
2) Insert two “AAA” Batteries inside the battery
chamber (as depicted inside the battery chamber).
3) Re-install lower battery cover.
4) If the remote control is not being used for extended
time periods, (vacation, off season) the batteries
should be removed from the remote control unit.
remote Control functions:
SLEEP
10