OPerATING INsTrUCTIONs
Controls
The electronic control key will look like the following:
NOTE: The outline of the operation panel is based on typical model, the function is the same with your air conditioner while
some difference may exist in appearance.
The vent control is located above the control knobs. The operation method is different on different
models (see the following figures).
For maximum cooling efficiency, CLOSE the vent. This will allow internal air circulation. OPEN the
vent to discharge stale air.
Vent Control
To open the vent, pull the lever towards you
To close it, push it in.
To open the vent, set the lever to the right position
To close it, set the lever in the left position.
CLOSE VENT OPEN
CLOSE OPEN
SWING
SWING
FAN
TIMER
SLEEP
POWER
MODE
C
COOL
DRY
FAN
HIGH MED LOW
TEMP
OPerATING INsTrUCTIONs
POWer:
Press the POWER key to turn the unit on/off.
(The TIMER key controls the auto start / stop feature of the unit.)
MODe:
Press the “MODE” key to select the appropriate operating mode from COOLING, FAN and DRY.The green indicator light
beside the “MODE” option will illuminate, identifying the mode selected. When using the DRY and AUTO mode, you cannot
select a fan speed. The fan motor operates on LOW speed in DRY mode and on MED speed in AUTO mode.
▲TEMPERATURE SETTINGS UP:
Press the ▲ key to increase the set (operating) temperature of the unit. Each time the key is pressed the temperature
increases as follows: 1
O
C (Celsius Scale) Maximum Setting 31
O
C
8
