▼ TEMPERATURE SETTINGS DOWN:
Press the ▼ key to decrease the set (operating) temperature of the unit. Each time the key is pressed the
temperature decreases as follows: 1
O
C (Celsius Scale) Minimum Setting 16
O
C
FAN:
Press this key to activate the appropriate fan speed setting. Each depression of the key will alternate through
LOW, MED, HIGH fan speed options. The green indicator light beside the FAN speed option will illuminate, identifying
the fan speed selected.
sWING (select Mode):
Press the “SWING” (only selected model) key to activate the automatic air swing (oscillation) feature. The green indicator
light adjacent to the “SWING” key will illuminate, identifying to the selected mode is operational. The vertical louvers will
oscillate back and forth (side to side) automatically sweeping air alternately for comfortable cooling . To stop the air swing
feature, Press the “SWING” key again, the green indicator light adjacent to the key will go off. Press the “SWING” key for
2 seconds will activate the SLEEP mode which can reduce noise creating a comfortable sleeping environment. When the
SLEEP mode is activated, the green indicator light beside the “SLEEP” function will illuminate.
TIMer:
Press the “TIMER” key to activate the “auto start/auto stop” timer function. Auto start/stop programs can be set from 0~12
hours. Each depression of the “TIMER” key will increase the selected time in 1 hour increments.
DrY:
This mode is used to decrease the humidity in the room.
COOLING:
The temperature setting are adjustable between 16
O
C to 31
O
C. Cooling begins automatically when the room temperature
is 1
O
C above the set point, and stops when the room temperature is 1
O
C below the set point. The fan will not stop
running.
AUTO:
The fan motor remains on MED speed in AUTO mode. The unit will select the appropriate operating mode from FAN,
COOL based upon the temperature difference between the actual and desired room temperature. If the actual room
temperature is 2
O
C above the set point, the unit operates in cooling mode. When the actual room temperature is not
2
O
C or higher above the set point and not 1
O
C or lower below the set point, the unit will select the FAN mode
Note:
If activating the SLEEP mode when the unit is operating on AUTO mode, the fan motor will changed into LOW speed mode
immediately.
sLeeP:
Press and hold the “SWING” key for 2 seconds or use the remote control to activate the “SLEEP” feature. Press and
hold the “SWING” key or use the remote control again for 2 seconds to deactivate the “SLEEP” feature. For units without
“SWING” feature, use the remote control to activate the “SLEEP” feature. In the Cooling mode, the cooling temperature
set point will increase 1
O
C per hour after the “SLEEP” mode is selected. Two hours later, the set point will continue at
this temperature and the fan motor will remain on LOW speed. Using the “SLEEP” mode will reduce noise creating a
comfortable sleeping environment.
Note:
When activating the SLEEP mode in AUTO mode, the set temperature will not change over time.
THe sLINGer-UP:
In this system automatically recycles condensed water of evaporator to condensor. Heat condensor absorbs condensed
water energy to improve performance and evaporates water to deal with the drainage problem.
seLF DIAGNOsIs FUNCTIONs:
In case of any abnormal operation or parts failure, the unit will shut o automatically to protect the machine. It also indicates
protection or error code for fast service.
9