Kortek corporation
19
of
99
PDP R&D Center
4. Alignment and Adjustments
4.1 Service Mode
4.1.1 Service Mode Entry Method(General Transmitter)
1. Turn off the power to make the SET STAND-BY mode.
2. In order to enter the Service Mode, select
Mute-1-8-2-Power
.
▶ In case entry into SERVICE MODE is unsuccessful, repeat the procedures above.
(
Warning
: Don
’
t entry into Aging Mode. If you do that, you cann
’
t back User Mode )
4.1.2 Initial DISPLAY State in times of SERVICE MODE Switch overs
1. Service Mode Select 2. Device Adjustment 3. White Balance
Service Mode Select
Device Adjustment
White Balance
Aging Mode
Reset
Ver 3.0
Device Adjustment
CXA2101
VPC3230 Main
Auto Pixel Shift
White Balance
R-Gain 127
G-Gain 127
B-Gain 127
R-Offset 127
G-Offset 127
B-Offset 127
Gain Max 48
Center Offset 144
4.1.3 Buttons Operations within SERVICE MODE
Menu
Entire menu display
Joystick UP/DOWN
Cursor move to select items
Joystick LEFT/RIGHT
Enable to increase and decrease the data of the selected items
▶
Notice:
In case of no signal in DTV MODE or PC MODE, entry into the FACTORY MODE cannot be mode.
Содержание P42SV
Страница 2: ...Kortek co kr May 2003 Printed in korea...
Страница 12: ...Kortek corporation 11 of 99 PDP R D Center 3 Electrical Specifications 3 1 Block Diagram...
Страница 54: ...Kortek corporation 53 of 99 PDP R D Center 6 Remote Control...
Страница 100: ......