KORADO KORAVENT 100, Инструкция по эксплуатации

Страница: 86 / 96

KORAVENT 100
86
The KORAVENT 100W type of the device
Putting into operation
The KORAVENT 100W device is connected to the Z-wave radio network.
Note: The following documentation which is intended for connecting the
KORAVENT 100W device to the Z-wave radio network is determined for trained
expert personnel only.
Inclusion / Exclusion
Push the on/off button 3 times in 1 .5 seconds .
Inclusion into an existing Z-wave network
The KORAVENT 100W device is fully compatible with the Z-wave network and it is possible to
operate it using Z-wave components from other manufacturers. The device is a “Listening Node”
which passes data on as a duplicating punch. For inclusion of the KORAVENT 100W device,
push the button of the device which is determined for administration of the systém (see the
particular operating and control direction for further details). Then include the KORAVENT 100W
device to the Z-wave network by pressing the
on/off button .
Putting the device back into the original settings
Push the on/off button 3 times in 1 .5 seconds and then keep it pushed for 5 seconds .
LED diod blicking confirms the following actions
• The KORAVENT 100W device has been included to/excluded out of the Z-wave network.
• The KORAVENT 100W device has been put back into the original settings set during its fabrication.
Supported classes
• COMMAND_CLASS_SWITCH_MULTILEVEL
• COMMAND_CLASS_SENSOR_MULTILEVEL_V3 (controlled)
• COMMAND_CLASS_PROTECTION
• COMMAND_CLASS_CONFIGURATION
• COMMAND_CLASS_SWITCH_POWERLEVEL
• COMMAND_CLASS_VERSION
• COMMAND_CLASS_MANUFACTURER_SPECIFIC
BASIC SET/BASIC REPORT/MULTILEVEL SET/MULTILEVEL REPORT
0 = Off; 255 = On, with the latest settings of air power level
Air power level: 1-16 = 1; 17-32 = 2; 33-48 = 3; 49-64 = 4; 65-80 = 5; 81-96 = 6; 97-99 = max.