KORAVENT 100
84
Step 6:
Fixing and connecting the KORAVENT 100 device
1.
Put the fixing holes situated at the back side of the
device on the fixing screws and push the device down
-
wards.
2.
Check whether the device is seated firmly.
3.
Press the front panel in places shown by the two upper
marking arrows and pull it towards you (see picture).
Tip the front panel out until you start feeling perceptible
resistance .
4.
Get hold of the filter’s frame situated down on the
partition and take it out of its holder .
5.
Fold the insulation mat placed inside .
6.
Push the wad fully into the oblong hole.
7.
Assemble the device again, following the
instructions in the reverse order .
8.
Plug the European-norm AC power
cord to the AC 230 V mains wall socket.
Содержание KORAVENT 100
Страница 23: ...N vod k pou it 23...
Страница 47: ...N vod na pou itie 47...
Страница 71: ...Bedienungsanleitung 71...
Страница 95: ...Instruction manual 95...
