www.kontron.com
CP6940 User Guide
// 31
3.4.1.10
QSFP LEDs
•
Off
link down
•
On
link up but no activity
•
Blinking
link up and activity
3.4.1.11
Front RJ45 status LEDs
Link/Activity: Green LED
•
Off
link down
•
On
link up but no activity
•
Blinking
link up and activity
Speed: Green/Amber LED
•
Off
10Base-T
•
On (amber)
100Base-Tx
•
On (Green)
1000Base-T
3.4.1.12
CPU 10/ 100/ 1000Base-T Management port LEDs
Link/Activity: Green LED
•
Off
link down
•
On
link up but no activity
•
Blinking
link up and activity
Speed: Green/Amber LED
•
Off
10Base-T
•
On (amber)
100Base-Tx
•
On (Green)
1000Base-T
3.4.1.13
CPLD healthy LED
The CPLD healthy LED indicates that all Voltages are in their specified range and the CPLD is out of reset.
•
On
CPLD is out of reset, but not all power rails are ready
•
Off
CPLD is in reset
•
Blinking
The CPLD is out of reset and all power rails are ready
3.4.2
Front Panel Switches
3.4.2.1
HANDLE SWITCH
A switch, actuated with the lower ejector handle of the board, is used to signal the inserting or impending extraction of
the board.
3.4.2.2
RESET
A reset switch is provided being activated with an adequate tool (e.g. pencil). When the reset switch is pressed the board
performs a power cycle to all devices including CPLD and BMC.
