Kontron AM4100, Руководство пользователя

Страница: 110 / 150

NetBootLoader AM4100
Page 5 - 22 ID 36126, Rev. 2.0
P R E L I M I N A R Y
D H C P
FUNCTION: Interface to a DHCP or BOOTP server; exchange network
configuration parameters
SYNTAX:
dhcp [<timeout>]
where:
dhcp command
<timeout> parameter: value: numerical string
<[n … ]n>
time, in seconds; must be

5 seconds
DESCRIPTION: This command is used to set the network parameters for operation of
an Ethernet port via either a DHCP or BOOTP server.
Initially the AM4100 does not have a valid Ethernet interface
configuration, and, therefore, this interface is inoperable. The initial
configuration must be done either manually from the SER0 interface
using the command NET, or, if a DHCP or BOOTP server is available,
it can be done automatically by the DHCP command.
Manually configured parameters are permanently stored. Parameters
configured using the DHCP command are temporary and will be lost if
the system is reset or cold started.
Prior to using the DHCP command, the IP address must be set to
255.255.255.255 with the NET command.
USAGE: Program NetBootLoader (normal operation)
COMMAND / RESPONSE:
NetBtLd> dhcp
Sending request... reply from BOOTP/DHCP
server.
Network initializated ok.
Server address is 192.168.112.2, our IP
address is 192.168.112.14.
Filename :
NetBtLd>