Kontron AM4100, Руководство пользователя

Страница: 123 / 150

AM4100 NetBootLoader
ID 36126, Rev. 2.0 Page 5 - 35
P R E L I M I N A R Y
DESCRIPTION: To set or display the operational parameters for the serial interfaces
the command PF is used.
At startup the settings for the SER0 and the SER1 interfaces are al-
ways set to the default values (9600/8/n/1). This is to avoid a possible
system lockout. If other settings are required during operation of the
NetBootLoader they may be made. If changes are made, it must be
ensured that corresponding parameters are used for the operator con-
sole.
Issuing this command without parameters being specified will display
the current serial port settings.
Syntax-wise, no spaces are permitted between the parameters and
they must be separated with a slash. Not all parameters must be
specified, but the “/” characters must be present to distinguish the
different parameters from each other. The sequence can be aborted
after every option.
USAGE: Set SER0 to 300 Baud, 7 Bits/char, odd parity, and 2 stop bits
COMMAND / RESPONSE (none):
pf ser0 300/7/o/2
Set the bits per character parameter of SER1 to 7
COMMAND / RESPONSE (none):
pf ser1 //7
Set the stop bits parameter of SER1 to 2
COMMAND / RESPONSE (none):
pf ser1 ///2
P F