886LCD-M Family
KTD-00474-E
Public User Manual
Date: 2005-05-24
Page
70 of 78
Feature
Options
Description
Quick Boot
Enabled
, Disabled
Allows BIOS to skip certain test while booting
Quiet Boot
Disabled
, Enabled,
Enabled & Maintain
Shows boot logo instead of POST screen
Bootup Num-Lock
Off,
On
Select Power-on state for numlock
PS/2 Mouse Support
Disabled, Enabled,
Auto
Select support for PS/2 Mouse
Halt on
Disabled,
All But
Keyboard
Wait for F1 key to be pressed if error. If no
keyboard present post will continue
Hit ‘DEL’ Message Display
Disabled,
Enabled
Display the message or not
Interrupt 19 Capture
Disabled
, Enabled
Allows option ROMs to trap interrupt 19
8.6 Security
Menu
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot
Security
Chipset Power Exit
Security Settings
Supervisor Password :Installed
User Password :Installed
Change Supervisor Password
User Access Level [Full Access]
Change User Password
Clear User Password
Password Check [Setup]
Boot Sector Virus Protection [Disabled]
Hard Disk Security
Primary Master HDD User Password
Primary Slave HDD User Password
Secondary Slave HDD User Password
Install or Change the
password.
<- Select Screen
|| Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.53 (C)Copyright 1985-2002, American Megatrends, Inc.
Feature
Options
Description
Change Supervisor Password
Password
Change the Supervisor Password
User Access Level
No Access, View Only,
Limited, Full Access
Set the user level Access for the BIOS
Change User Password
Password
Change the User Password
Clear User Password
Ok, Cancel
Clears the User Password
Password Check
Setup, Always
Shall the BIOS prompt for password on boot or
only when entering setup
Boot Sector Virus Protection
Enabled,
Disabled
Will write protect the MBR when the BIOS is
used to access the harddrive
HDD Password
Password
Locks the HDD with a password, the user
needs to type the password on power on
