886LCD-M Family
KTD-00474-E
Public User Manual
Date: 2005-05-24
Page
7 of 78
1. Introduction
This manual describes the 886LCD-M/Flex, 886LCD-M/ATX and 886LCD-M/mITX boards made by
KONTRON Technology A/S. The boards will also be denoted 886LCD family if no differentiation is required.
All boards are to be used with the Intel® Pentium® M & Intel Celeron® M Processors.
Use of this manual implies a basic knowledge of PC-AT hard- and software. This manual is focused on
describing the 886 Board’s special features and is not intended to be a standard PC-AT textbook.
New users are recommended to study the short installation procedure stated in chapter 3 before switching-
on the power.
All configuration and setup of the CPU board is either done automatically or by the user in the CMOS setup
menus. Except for the CMOS Clear jumper, no jumper configuration is required.
