886LCD-M Family
KTD-00474-E
Public User Manual
Date: 2005-05-24
Page
59 of 78
Feature
Options
Description
ATA(PI) 80Pin Cable Detection
Host & Device
,
Host,
Device
Select the mechanism for detecting 80Pin
ATA Cable
P-ATA1 Cable Detection Force
Disable
, 40Pin, 80Pin
Force the board to operate as if a 40Pin ATA
cable or 80Pin ATA cable is installed on the
Primary channel
P-ATA2 Cable Detection Force
Disable
, 40Pin, 80Pin
Force the board to operate as if a 40Pin ATA
cable or 80Pin ATA cable is installed on the
Primary channel
Hard Disk Write Protect
Disable
, Enabled
Enable write protection on HDDs, only works
when it is accessed through the BIOS
IDE Detect Time Out (Sec)
0,5,10,15,20,25,30,
35
Select the time out value when the BIOS is
detecting ATA/ATAPI Devices
BIOS SETUP UTILITY
Advanced
Primary IDE Master
Device :Hard Disk
Vendor :ST340014A
Size :40.0GB
LBA Mode :Supported
Block Mode :16Sectors
PIO Mode :4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-5
S.M.A.R.T. :Supported
Type [Auto]
LBA/Large Mode [Auto]
Block (Multi-Sector Transfer) [Auto]
PIO Mode [Auto]
DMA Mode [Auto]
S.M.A.R.T. [Auto]
32Bit Data Transfer [Auto]
Select the type of
devices connected to
the system
<- Select Screen
|| Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V02.53 (C)Copyright 1985-2002, American Megatrends, Inc.
Feature
Options
Description
Type
Not Installed,
Auto,
CDROM,
ARMD
Select the type of device installed
LBA/Large Mode
Disabled,
Auto
Enabling LBA causes Logical Block
Addressing to be used in place of
Cylinders, Heads, and Sectors.
Block (Multi-Sector Transfer)
Disabled,
Auto
Select if the device should run in Block
mode
PIO Mode
Auto
, 0, 1, 2, 3, 4
Selects the method for transferring the
data between the hard disk and system
memory. The Setup menu only lists those
options supported by the drive and
platform.
(continued)