886LCD-M Family
KTD-00474-E
Public User Manual
Date: 2005-05-24
Page
60 of 78
DMA Mode
Auto
, SWDMA0, SWDMA1,
SWDMA2, MWDMA0,
MWDMA1, MWDMA2, UDMA0,
UDMA1, UDMA2, UDMA3,
UDMA4, UDMA5
Selects the Ultra DMA mode used for
moving data to/from the drive. Autotype
the drive to select the optimum transfer
mode.
Note : To use UDMA Mode 2, 3,
4 and 5 with a device, the harddisk
cable used MUST be UDMA66/100/133
cable (80 conductor cable).
S.M.A.R.T.
Auto
, Disabled, Enabled
Select if the Device should be monitoring
itself ( Self-Monitoring, Analysis and
Reporting Technology System)
32Bit Data Transfer
Disabled
, Enabled
Select if the Device should be using
32Bit data Transfer
8.3.3 Advanced settings – LAN Configuration
BIOS SETUP UTILITY
Main Advanced
PCIPnP
Boot Security Chipset Power Exit
Floppy Configuration
ETH1 Configuration [With PXE boot]
MAC Address : 00E0F4000001
ETH2 Configuration [Enabled]
MAC Address : 00E0F4000002
ETH3 Configuration [Enabled]
MAC Address : 00E0F4000003
Select the type of
floppy drive connected
to the system
<- Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
V02.53 (C)Copyright 1985-2002, American Megatrends, Inc.
Feature
Options
Description
ETH1 Configuration
Disabled,
Enabled,
With RPL/PXE boot
Select if you want to enable the LAN
adapter, or if you want to activate the
RPL/PXE boot rom
ETH2 Configuration
Disabled,
Enabled,
With RPL/PXE boot
Select if you want to enable the LAN
adapter, or if you want to activate the
RPL/PXE boot rom
ETH3 Configuration
Disabled,
Enabled,
With RPL/PXE boot
Select if you want to enable the LAN
adapter, or if you want to activate the
RPL/PXE boot rom
