KONICS krn100, Руководство пользователя

Страница: 108 / 155

8
Parameter detail setup
108 © Copyright Reserved KONICS Co., Ltd.
8.5.10 Alarm Speed (Alarm record speed)
Set record speed for alarm cause and details when alarm occurs.
It is actiaved when Record Mode(Record mode) is set as Graph.
You cannot set Alarm Speed(Alarm record speed) as below Standard Speed(Standard record
speed). If you change Standard Speed, Alarm Speed is changed as the same set value
automatically.
When alarm occurs, record progresses with set Alarm Speed. When alarm is reset, it returns to
Standard Speed.
 Set range: 10
↔
20
↔
40
↔
60
↔
120
↔
240mm/h

Factory default: 20mm/h

If alarm and digital input occur at the same time, digital input is ignored and it records with
the set value of Alarm Speed(Alarm record speed). When alarm is reset, it returns to
Standard Speed (Standard record speed).
In graph mode, record speed is change by Standard speed, Alarm and Option Speed.
Backup data is printable only with Standard speed. Therefore, original graph mode printout
and backup graph mode printout may be different.
8.5.11 Power On Status (Record status when power ON)
Designate one record operation stauts from 3 mode for when KRN100 re-turns ON from OFF by
power failure.
Hold(Maintain) Maintains record status of before power OFF (recording or stop recording).
Run(Record) Operates recording when power is ON.
Stop(Stop recording) No recording when power is ON.

Set range: Hold ↔ Run ↔ Stop

Factory default: Hold