KONICS krn100, Руководство пользователя

Страница: 6 / 155

Safety Precautions
vi © Copyright Reserved KONICS Co., Ltd.
Safety Precautions
 Following these safety precautions will ensure the safe and proper use of the product and
help prevent accidents and minimize hazards.
 Safety precautions are categorized as Warnings and Cautions, as defined below:
Warning
Cases that may cause serious injury or fatal accident if
instructions are not followed.
Caution
Cases that may cause minor injury or product damage if
instructions are not followed.
 In case of using this unit with machinery (Ex: nuclear power control, medical equipment,
ship, vehicle, train, airplane, combustion apparatus, safety device, crime/disaster prevention
equipment, etc) which may cause damages to human life or property, it is required to install
fail-safe device.
It may cause a fire, human injury or property loss.
 It must be mounted on panel.
It may cause electric shock.
 Do not connect, inspect or repair this unit when power is ON.
It may cause electric shock.
 Check input power specification and check power terminal number when wiring power cable.
It may cause a fire or damage by a fire.
 Lithium battery is used in this product, do not disassemble or burn up this unit.
It may cause an explosion.
 Do not touch the product or connect terminal within 30 sec. after turn off the power.
It may cause electric shock.
 F.G. terminal should be isolation grounded. Grounded wire should be over AWG16(1.25
mm
2
).
It may cause electric shock.
 Do not insert your finger or object into the vent of this unit.
It may cause electric shock or human injury.
 Do not disassemble or modify this unit. Please contact us if it is required.
It may cause a fire, human injury or property loss.
 This unit shall not be used outdoors.
It may shorten the life cycle of the product or cause electric shock.

When wiring power input terminal and measuring input terminal, power line should be over
AWG 20(0.50mm
2
). Terminal screw should be tightened with 0.74 N • m to 0.90 N • m torque.
Please observe the rated specifications.
It may cause shorten the life cycle of the product and cause a fire.