KONICS krn100 Скачать руководство пользователя страница 135

Страница: 135 / 155

Parameter detail setup

© Copyright Reserved KONICS Co., Ltd.

135

8.9.6

Select Print Mode (Backup data recording mode setting)

It is able to print with different record mode from original backup data’s record mode.



Set range: Graph

↔

Digital



Factory default: Graph

To print with different record mode from original backup data’s record mode, it records with the

set record speed(in case record mode is Graph) or the set record period (in case record mode is

set as Digital) from record mode(Digital or Graph) on current record setup.

For example, in case original backup data is saved as Digital mode (Backup Print Mode:

displays digital). To print with Graph mode (Select Print Mode: set as Graph), Graph mode’s

record speed follows the set record speed of graph mode in current record setup.



How to select record backup file

1st

Move to RECORD BACKUP SETUP parameter setting group.

2nd In Backup Data List, press

key and system memory and the saved backup

data in USB are also display. (If backup data is not designated or does not exist, it
displays "File Not Found!!".)

3rd Select the desired file in Basckup Data List and press

key and menu is

displayed.
(Marked ‘*’ files displays currently saving file.)

Содержание krn100




























































































































































Результаты поиска

Содержание krn100

Отзывы:

KONICS krn100, Руководство пользователя, Страница: 135 / 155

Результаты поиска

Содержание krn100

Отзывы: