KONICS krn100, Руководство пользователя, Страница: 99 / 155

8
Parameter detail setup
© Copyright Reserved KONICS Co., Ltd. 99
8.5 RECORD SETUP (Record setting)
You can set record mode, record speed, record language, and digital memo, etc.
Depending on record mode (Digital, Graph), below parameters are changed.
Move to RECORD SETUP with , keys, press key to enter RECORD
SETUP.
 Parameter list
Parameter Set range Factory default
Record Mode (Recode mode) Graph ↔ Digital Graph
Digital Print type (1 line record channel during numeric
recording)
OneCH ↔ TwoCH TwoCH
Standard Speed (Standard record speed)
10 ↔ 20 ↔ 40 ↔ 60 ↔ 120 ↔ 240mm/h 20mm/h
Option Speed (Option record speed) 10 ↔ 20 ↔ 40 ↔ 60 ↔ 120 ↔ 240mm/h 20mm/h
Memo Period (Digital memo period) Refer to detail descriptions. 2hour
Divide Zone (Record zone division) None, 2 to 12 None
Standard Period (Standard record period) 00m01s to 99m99s -
Option Period (Option record period) 00m01s to 99m99s -
Listing Language (Language for list output) Korea ↔ English English
Alarm Speed (Alarm record speed) 10 ↔ 20 ↔ 40 ↔ 60 ↔ 120 ↔ 240mm/h 20mm/h
Power On Status (Record status when power ON) Hold ↔ Run ↔ Stop Hold
Run Status (List printing at start recording) OFF ↔ ON OFF
List Out Option (List record option) Standard ↔ Option Standard
Zone Dot Line Distance (Dot line for zone division) None to 8.0mm 4.0mm
CH Print Distance (Record interval for each channel
graph)
None to 100.0mm 20.0mm
Start Line Print (Start line when starting record) ON ↔ OFF ON
Range Print Time (Input range record period) Disable,1to 24 hour Disable
※ Shaded parameters are affected by set value of other parameters. Please refer to specific
descriptions of each parameter.