Note for Windows Me/98SE USB users
71
Note for Windows Me/98SE USB users
When you are using a USB connection and you cannot select the USB port during
the installation of the KONICA MINOLTA PagePro 1350EN driver and utilities in
Windows Me or Windows 98SE, cancel the CD-ROM installation procedure and
remove the PagePro 1350EN Utilities & Documentation CD-ROM from the PC’s
CD-ROM/DVD drive. Then proceed as follows :
1
Disconnect the USB cable from the printer side (leave the connector on
the PC side).
2
Turn off the printer and the PC. Then turn both on again. Wait until the PC
and printer are ready.
3
Insert the PagePro 1350EN Utilities & Documentation CD-ROM in the
CD-ROM/DVD drive of your PC. When the CD-ROM Installer shows up,
cancel it.
4
Connect the USB cable with the printer. Now, the ‘New Hardware Found’
wizard shows up.
Windows Me
: Proceed with step 5.
Windows 98SE
: Wait until the ‘Add New Hardware’ wizard screen
appears. Then click on
Next
.
5
In the ‘Add New Hardware’ screen, select
Automatic search for a better
driver (Recommended)
. Then click on
Next
.
6
Windows Me
: Proceed with step 7.
Windows 98SE
: When the next dialog appears, check the ‘Specify a
There is insuf-
ficient fusing
or the image
comes off
when rubbed.
The media is moist from
humidity.
Remove the moist media and
replace it with new, dry media.
Media with specifications not
covered by the printer warranty
is being used.
Use media that is covered by
the printer warranty.
The media type may be incor-
rectly set.
When printing envelopes,
labels, thick stock, and trans-
parencies, the appropriate
media type must be specified
in the printer driver.
Symptom
Cause
Solution
Содержание PagePro 1350EN
