Konica Minolta Magicolor 7300, Справочное руководство

Страница: 198 / 334

Electronic Document Collation 190
Electronic Document Collation
"#
Note that this 12-page file is nothing more than THREE IDENTICAL
4-page documents.
"#
The Collation feature is supported only on printers with an internal
hard disk installed.
When collate is not selected and the copy count is set to 3, the application
sends the 4-page file once, with a copy count of 3 embedded in the data
stream. Printers without collation features usually print page 1 three times,
followed by page 2 three times, page 3 three times, and page 4 three times.
You must manually collate the pages afterward to obtain the documents. The
example discusses what happens when only three copies are selected. In
some cases, many more copies are needed.
KONICA MINOLTA technology offers a better solution:
With your printer, you do not have to select collation in the software
application when you need multiple copies of your document. If the driver
collate setting is turned on, just enter the number of copies you need in the
driver. The print data is sent
once , regardless of the number of copies you
selected. Your printer prints and automatically collates the specified amount
of documents, with the pages in the correct order for each copy of the
document.
This feature allows a very efficient way of producing multiple
documents while keeping the network traffic at a minimum and saving you
from manually collating the printed pages into documents.
"#
Your printer is shipped with the collate feature switched off. You may
switch it on after installing a hard disk on your printer.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500