Konica Minolta Magicolor 7300, Справочное руководство

Страница: 200 / 334

Overlay Printing 192
The next step is to transfer this file to the internal hard disk of your printer. You
can use the Download Manager application or FTP to transfer the files to the
hard disk of the printer.
"#
Overlays are not supported on Macintosh.
Important Note for KONICA MINOLTA Windows 98/Me
PostScript Driver Users
If you created the overlay file using the KONICA MINOLTA Windows 98/Me
PostScript driver, you must also perform the following step before download-
ing it to the printer.
Using any text editor, add a PostScript “end” command following the
PostScript “grestore” command.
Attention
Do not make this change to overlay files generated by any
KONICA MINOLTA driver other than the Windows 98/Me PostScript
driver.
After it’s edited, the file layout will appear as follows:
gsave
PS data 1
PS data 2
.
.
.
.
.
.
PS data N
grestore
end
Troubleshooting Overlays
If an overlay file doesn’t print, it may be because it contains PJL, UEL, or
non-device-independent PostScript commands. To fix the overlay, use any
text editor to remove the following commands from the overlay file and then
download it again to the printer.
In the file to be printed, remove:
1
All PJL commands.
Delete any commands that contain the character sequence “@PJL”.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500