Konica Minolta Magicolor 7300, Справочное руководство

Страница: 19 / 334

Ethernet Interface
11
7
Connect your printer to the network.
Attach your printer to the network by
plugging the network RJ45 connector into
the RJ45 receptacle on the interface panel
of your printer.
If you experience problems locating the
printer on your network, see “Checking
TCP/IP Connections” below.
8
Install the Crown Print .
"#
In a TCP/IP environment, you
should install the Crown Print
and the printer driver on
each PC having network access to
your printer.
9
Install the printer driver.
10
When you have finished, remove the
Software Utilities CD-ROM, and store it in
a safe place.
Checking TCP/IP Connections
Verify that the communication to
the printer is working properly by
“pinging” the printer.
1
From the Start button menu,
select
Run , and then at the
prompt, type
command
2
Select OK .
3
From the command line, type
ping <IP Address>
For example,
ping 161.33.128.5
↵
? What’s a Print Monitor?
A print monitor is software
that enables the
connection between
software applications and
the network port on your
PC. While some versions
of Windows come with a
print monitor, the Crown
Print that came
with your printer was
designed specifically for
your printer. It allows the
transportation of print data
using TCP/IP protocol for
serverless printing.
?
Why Ping?
The Ping command sends a small
packet of information to the IP
Address and waits for a return
packet. If the connections and
addresses are good, a packet of
information is returned to the sending
workstation.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500