Konica Minolta Magicolor 7300, Справочное руководство

Страница: 16 / 334

Ethernet Interface 8
Ethernet Interface
The standard Ethernet interface is an RJ45 type of connector, capable of
transmission speeds from 10 Mbit/s up to 100 Mbit/s.
"#
The above illustration shows the receptacle of the Ethernet interface
on the interface panel of the printer.
Making the Ethernet Connection
1
Set the Internet address.
This setting must contain a unique IP address. Printers are shipped with a
preset IP address. In most cases you may want to modify this address, so
it doesn’t conflict with any other IP address present in your network or in
networks attached.
"#
Your network system administrator should assign the IP address.
"#
You need the printer’s IP address when setting up the port on your
workstation.
With DHCP —If your network supports DHCP (Dynamic Host
Configuration Protocol), your IP address will be automatically assigned by
the DHCP server when you turn on your printer.
Pin Description
1 Transmit Data (+)
2 Transmit Data (-)
3 Receive Data (+)
4 Reserved
5 Reserved
6 Receive Data (-)
7 Reserved
8 Reserved
1 8
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500