Konica Minolta Di1610f, Расширенная информация

Страница: 48 / 268

3
Before Making Copies or Faxing
3-14 Di1610f
3.5 Turning the Machine On/Off and the Initial Mode
Turning the Machine On/Off
To turn on the machine:
§ Press the | (on) side of the Power
Switch.
To turn off the machine:
§ Press the
2
(off) side of the Power
Switch.
Note
Do not turn off the machine while a print cycle is being performed, as
a paper misfeed will result. Before attempting to turn off the machine,
always be sure that the current print cycle has been completed.
Turning off the machine will initialize all settings except those for
previously programmed jobs and for the Utility mode.
Do not turn off the machine while it is scanning or sending or receiving
data, otherwise all scanned data or transmission data will be deleted.
The machine automatically enters the Energy Save mode 15 min after
the last operation is performed.
The time until the machine enters Energy Save mode can be specified
from the Utility mode. For details, refer to “Specifying the Setting for
“ENERGY SAVE MODE”” on page 7-5 in the chapter “Using the Utility
Mode”.
When the Machine is Turned On
When the machine is turned on, the [Start] key indicator lights up in
orange to indicate that the machine is ready to begin printing.
At this time, the machine can be set for the Auto Print Start function by
loading a document into the Auto Document Feeder or by placing a
document on the Original Glass, and pressing the [Start] key.
Pressing the [Start] key at this time will not immediately start the print
cycle. You will have to wait for less than 25 seconds (at an ambient
temperature of 23°C (73.4°F)).