Konica Minolta Di1610f, Расширенная информация

Страница: 238 / 268

8
When a Message Appears
8-24 Di1610f
LINE PROBLEM
CHECK LINE
• The telephone dialing
system or telephone
wiring system are not set
correctly.
• The telephone cable is not
attached correctly.
• Check the telephone
dialing system or
telephone wiring system
and use the appropriate
Utility mode function to
make the correct settings.
• Correctly connect the
telephone cable.
*COMM.ERROR*
(####) • Communication is not
possible because of some
problem in the machine.
• Communication is not
possible because of a
problem with the recipient/
caller’s fax machine.
Check the transmission
results.
*REDIAL ALL FAILED* All redial attempts failed
because either the
recipient’s line is busy or
there was no answer. Check the condition of the
recipient’s line, and then try
sending the fax again.
*MEM.FULL/TX CANCEL* While sending a fax, the size
of the data for the scanned
image has exceeded the
capacity of the memory. • Retrieve all received
faxes stored in the
memory.
• Send the fax by direct
transmission.
*MEM.FULL/RX CANCEL* While receiving a fax, the
size of the data for the
received image has
exceeded the capacity of the
memory. Retrieve all received faxes
stored in the memory.
FILE FULL/TX CANCEL While sending a fax, the
maximum of number of
managed memory file is
used. Retrieve all received faxes
stored in the memory.
FILE FULL/RX CANCEL While receiving a fax, the
maximum of number of
managed memory file is
used. Retrieve all received faxes
stored in the memory.
HANG UP THE PHONE The receiver of the
connected telephone is
lifted. Replace the receiver of the
connected telephone on the
hook.
TEXT ×1.00 1
ä
[A]
ü
#XXX: EMPTY
(While specifying copy
settings)
The selected paper tray has
run out of paper.
“#” indicates the paper tray,
and “XXX” indicates the
paper size. Either load paper of the
specified size into the
specified paper tray, or press
the [Paper] key and select a
different paper size.
TEXT ×1.00 1
ä
[A]
ü
#XXX: Fax Err
A fax error occurred while an
operation was being
performed in Copy mode. Press the [Fax] key to check
the error condition, and take
appropriate measures.
TEXT ×1.00 1
ä
[A]
ü
#XXX: Comm.Err
A fax transmission error
occurred while an operation
was being performed in
Copy mode. Press the [Fax] key to check
the error condition, and take
appropriate measures.
Message Cause Action
(Flashing alternately)