Konica Minolta Di1610f, Расширенная информация

Страница: 239 / 268

When a Message Appears
8
Di1610f 8-25
8.10 When Incorrect Copies Are Produced
Symptom Possible Cause Action
The printed output is too
light. The density level for the Auto
setting is set to “LIGHT”. Adjust the setting for
DENSITY LEVEL (A) in the
Utility mode. (p. 7-20)
Otherwise, cancel the “Auto”
density setting, and then
manually select the desired
density setting. (p. 4-11)
The density level is set to
“LIGHT”. Press the [ ] key, and then
select a darker print density.
(p. 4-11)
Does the message “TONER
EMPTY” or “TONER NEAR
EMPTY” appear in the
Display? Change the Toner Cartridge
with a new one. (p. 8-6)
The paper is damp. Change the paper.
The printed output is too
dark. The density level for the Auto
setting is set to “DARK”. Adjust the setting for
DENSITY LEVEL (A) in the
Utility mode. (p. 7-20)
Otherwise, cancel the “Auto”
density setting, and then
manually select the desired
density setting. (p. 4-11)
The density level is set to
“DARK”. Press the [ ] key, and then
select a lighter print density.
(p. 4-11)
The Original Glass surface is
dirty. Wipe the Original Glass
clean with a soft, dry cloth.
The original is not held tightly
against the Original Glass. Place the original in position
so that it is held tightly
against the Original Glass.
The printed output is blurry. The paper is damp. Change the paper.
Ö
Ö