Konica Minolta CM-23d, Инструкция по эксплуатации

Страница: 104 / 151

101
„ Date Format Settings
The format of the date displayed on the screen can be changed.
Memo
The date format is set to “yyyy/mm/dd” when the instrument is shipped from the factory.
Operating Procedure Start the procedure from the <Setting> - <Instrument setup> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Date format”,
and then press the [Confirmation] key.
The <Date format> screen is displayed.
2
Use [
▲
] or [
▼
] to move the cursor to the desired
measurement mode.
Settings
{ yyyy/mm/dd : The date is displayed in year/month/day
order.
{ mm/dd/yyyy : Display the date in the format of month/
day/year.
{ dd/mm/yyyy : Display the date in the format of day/
month/year.
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen .
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed, and the screen will
return to the <Instrument setup> screen.