Konica Minolta CM-23d, Инструкция по эксплуатации

Страница: 77 / 151

74 73
Measur
ement
2
„ Default Tolerance Setting
Memo
• The default tolerance is set to the following values when the instrument is shipped from the factory.
Lower limit: -1.00 / Upper limit: 1.00
Δx, Δy, Δz Lower limit: -0.01 / Upper limit: 0.01
Operating Procedure Start the procedure from the <Default data setup> screen.
1
Move the cursor to “Default tolerance”, and then
press the [Confirmation] key.
The tolerance list screen is displayed.
2
Use [
▲
] or [
▼
] to move the cursor to the item to set,
and then press the [Confirmation] key.
The <Edit tolerance> screen is displayed.
3
Use [
▲
]/[
▼
] and [
◀
]/[
▶
] to move the cursor to the
item to set, and then press the [Confirmation] key to
change the setting.
• When the selected item is not currently checked,
pressing the
[Confirmation] key
causes the item to be
checked, after which the setting value can be changed.
• Press
[
◀
] or [
▶
]
to move the cursor to the setting value
area. Pressing the [Confirmation] key causes the
cursor to appear on the value. Press
[
▲
] or [
▼
]
to
change the value. Move the cursor between the digits of
the value by pressing
[
◀
] or [
▶
]
.
Settings
{ x / y : -0.2000 to 0.2000
{ Equation / MI : 0.00 to 20.00
{ Other than the above : -20.00 to 20.00
• Press the
[Confirmation] key
to confirm every time the
setting of an item is changed.
4
After all settings have been configured, use [
▲
] or
[
▼
] to move the cursor to “OK”, and then press the
[Confirmation] key.
The setting is confirmed and the screen returns to the
<Edit
tolerance> screen .
5
Press [ESC] to return to the <Default data setup>
screen.