Konica Minolta CM-23d, Инструкция по эксплуатации

Страница: 137 / 151

134 133
Troubleshooting
5
Symptom Check Point Action
Data cannot be
transferred to a computer
from the instrument.
No commands from the
computer are being
accepted. Is the USB cable connected
correctly? Properly connect the instrument’s USB connecting
terminal to the computer’s USB port with the USB
cable supplied with the instrument.
Has Bluetooth communication
been established? Install and connect the Bluetooth module correctly.
Printing is not possible. Has Bluetooth communication
been established? Install and connect the Bluetooth module correctly.
Samples and settings are
not held in memory and
disappear immediately. The instrument’s backup
battery may be low
immediately after purchase or
following a period of
prolonged non-use. Turn the
instrument ON to charge the
backup battery. Under this
condition, the backup battery
will be fully charged in
20 hours. The backup battery in the instrument should last
10 years under normal use. If the instrument fails to
retain data in memory even after the battery has been
fully charged, however, the battery has likely reached
the end of its life and requires replacement.
To replace the backup battery, please contact a
KONICA MINOLTA-authorized service facility.