Konica Minolta CM-23d, Инструкция по эксплуатации

Страница: 71 / 151

68 67
Measur
ement
2
„ Tolerance Settings
Specify the tolerance used for pass/fail judgment of measured for each target.
Operating Procedure Start the procedure from the <Target menu> - <Pass/Fail> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Edit
tolerance”, and then press the [Confirmation] key.
The tolerance list screen is displayed.
2
Use [
▲
] or [
▼
] to move the cursor to the item to set,
and then press the [Confirmation] key.
The <Edit tolerance> screen is displayed.
3
Use [
▲
]/[
▼
] and [
◀
]/[
▶
] to move the cursor to the
item to set, and then press the [Confirmation] key to
change the setting.
• When the selected item is not currently checked,
pressing the [Confirmation] key causes the item to be
checked, after which the setting value can be changed.
• Press [
◀
] or [
▶
] to move the cursor to the setting value
area. Pressing the
[Confirmation] key
causes the
cursor to appear on the value. Press [
▲
] or [
▼
] to
change the value.
Move the cursor between the digits of the value by
pressing
[
◀
] or [
▶
]
.
Settings
{ x / y : -0.2000 to 0.2000
{ Equation / MI : 0.00 to 20.00
{ Other than the above : -20.00 to 20.00
• Press the
[Confirmation] key
to confirm every time the
setting of an item is changed.
4
After all settings have been configured, use [
▲
] or
[
▼
] to move the cursor to “OK”, and then press the
[Confirmation] key.
The setting is confirmed and the screen returns to the
<Pass/Fail> screen .
Pressing the
[ESC]
while configuring the settings will prevent
the settings on the currently opened screen from being
applied and revert all settings to the previous condition.
5
Press [ESC] to return to the <Pass/Fail> screen.