manualshive.com logo in svg

Konica Minolta bizhub 25e, Руководство по полевой инженерии

Поделиться
Скачать
Konica Minolta bizhub 25e Скачать руководство пользователя страница 210

4-4

4.3.2 Troubleshooting

04: RX motor 2 error

08: RX motor error

Causes:

The machine has detected motor-lock signal while the motor is driving.

Suggested corrective action:

1.  Check the connection of harness between the motor and main control board.

2.   Replace the motor.

3.   Replace the main control board.

4.  Replace the harness between the motor and main control board.

0B: Fan Error

Detail code:

1: Fan 1 error (Fan for fuser; located on the back side of machine)

2: Fan 2 error (Fan for exhausting ozone; located on the left side of machine)

Causes:

The machine has detected fan error signal while the fan is driving.

Suggested corrective action:

1.  Check the connection of harness between the fan and main control board.

2.   Replace the motor.

3.   Replace the main control board.

4.  Replace the harness between the fan and main control board.

0D: Temperature / humidity sensor error

Causes:

The sensor showed an abnormal value.

Suggested corrective action:

1.  Check the connection of the thermistor.

2.   Replace the thermistor.

18: Fuser Error

Detail code:

1: Fuser started warming up but could not reach the warm-up starting temperature within specified time

2: Fuser could not reach the warm-up completion temperature within specified time

3: Printing started but could not reach the print motor driving temperature within specified time

4: Printing started but could not reach the paper feeding temperature within specified time

6: Printing started but could not reach the printing temperature within specified time

8: The fuser temperature does not rise when the heater is turned on

9: Fuser thermistor showed an abnormally high value

10: Fuser thermistor showed an abnormally low value

11:  The fuser temperature does not drop after warming-up or printing has finished and a specified time has 

passed

Suggested corrective action:

1.  Check the connection between the fuser and main control board.

2.   Replace the fuser.

3.   Replace the main control board.

4.  Replace the power supply unit.

Содержание bizhub 25e


































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды