Konica Minolta AeroDR SKR 4000, Руководство по эксплуатации

Страница: 5 / 60

5
Introduction
The digital radiography SKR 4000 (hereinafter, both are referred to as this device) perform X-ray imaging of the hu-
man body using an X-ray planar detector that outputs a digital signal, which is then input into an image processing
device, and the acquired image is then transmitted to a filing system, printer, and image display device as diagnostic
image data.
• Diagnostic X-ray image data of this device does not provide mammographic images.
The ImagePilot (hereafter referred to as the image processing controller), which controls the receiving, processing,
and output of image data, is required for operation. For the operation of the image processing controller, refer to the
"Operation Manual" of the image processing controller. Also, regarding the connectable devices, contact Konica Mi-
nolta technical representative.
This operation manual provides instructions on the basic functions for operation of this device. Those operating this
device for the first time should read this manual beforehand.
Also, store this manual close to this device after reading it through, so it can be used as a guide to allow optimum
operating conditions.
IMPORTANT
• This operation manual (English version) is effective only outside Japan.
• "AeroDR NS 1417" denoted in this document refers to the operation manual name of the product name P-41.
• If the pages of the operation manual are smudged and illegible, replace it with a new one. (There is a fee for this service.)
USA only
Indications for Use
This device is indicated for use in generating radiographic images of human anatomy. It is intended to replace a
radiographic film/screen system in general-purpose diagnostic procedures.
This device is not indicated for use in mammography, fluoroscopy, and angiography applications.
CAUTION
• Federal law restricts this device to sale by or on the order of a physician.