Konica Minolta AeroDR SKR 4000, Руководство по эксплуатации

Страница: 37 / 60

37
1
2
3
4
5
6
7
8
9
10
11
12
3�4 Charging of Battery
Charge the Battery when the Battery LED (orange) on
the DR Detector lights or flashes, or when the battery
level gets low in the status display of the DR Detector
on the image processing controller.
IMPORTANT
• During charging, if the Battery should become hot, stop
charging immediately.
• Connectors may become warm immediately after charging.
This often occurs during charging and is not a malfunction.
HINT
• The DR Detector can be used while stopping charging in
progress.
• The following charging time will be required to fully charge
the Battery.
Charging status Charging time
Battery Charger 3 hours or less
DC Power Cable 6 hours or less (if not expose)
3�4�1 Charging with Battery
Charger
IMPORTANT
• Handle the Battery carefully when inserting and removing
the Battery. The battery connector port may be damaged.
• The battery connector port of the Battery may become
warm right after charging on the Battery Charger. This often
occurs during charging and is not a malfunction.
1
Align the insertion direction indication
mark on the Battery with the battery con -
nector port of Battery Charger, and then
insert the Battery�
• Charging starts.
• When charging starts, the charging LED (or-
ange) of Battery Charger turns on.
Battery
Battery connector port
Insertion direction
indication mark
• When charging completes, the charging LED
(orange) turns off, and the fully charged LED
(green) turns on.
Fully charged LED
(green)
Charging LED
(orange)
2
Remove the Battery when charging com-
pletes�