Konica Minolta AeroDR SKR 4000, Руководство по эксплуатации

Страница: 20 / 60

20
Safety precautions
Taiwan
Observe the following based on the regulations stat -
ed in Article 10 of Administration Measures for Low-
power Radiation Electric Machines.
Article 12
As for type-approval qualified low-power radio-frequency
generator, no company, firm, or user may arbitrarily
change the frequency, increase the power or alter the
function or characteristics of the original design without
prior permission
Article 14
The use of low-power radio-frequency electric machines
shall not affect air flight safety or disturb lawful commu-
nication. If disturbance is found, the use of such electric
machines shall be suspended immediately and such use
shall not be resumed until the disturbance is eliminated.
Lawful communication mentioned in the preceding para-
graph refers to wireless communication operation in ac-
cordance with the provisions of the Telecommunication
Law.
Low-power radio-frequency electric machines shall toler-
ate disturbance from lawful communication or from radio-
wave radiation electric machine for industrial, scientific or
medical use
Brazil
This equipment operates secondarily, that is, it doesn’t
benefit from protection against harmful interference,
even from stations of the same type, and cannot cause
interference to systems that operate primarily.
DR Detector has been approved by ANATEL in com-
pliance with the procedures regulated by Resolution
242/2000 and complies with the applicable technical
requirements.
This device fulfill the requirements set forth in INMET-
RO Ordinance No 350, dated 06/09/2010, and other
regulations pertaining to compulsory certification of
Electrical Equipment Subject to Sanitary Surveillance
by ANVISA (RDC No 27, dated 21/06/2011, and Nor-
mative Instruction No 11, dated 16/12/2014).
The highest SAR value reported during product certifi-
cation when used properly on the body is 0.074 W/kg
(for P-41 model).
Konica Minolta hereby declares that this device prod-
ucts fulfill the biocompatibility aspects of ISO 10993-
1:2009.
This equipment operates with a voltage of AC 127V.
For more information, please visit:
http://www.anatel.gov.br
1�3�5 Precautions for installing,
moving, and storing
WARNING
• Take note of the following when installing and relocating
the AC Adapter and Battery Charger:
— Do not subject to shocks or vibration .
— Do not move with the power cable or any other cable
connected
— Do not install the power cable and DC Power Cable
so that you do not catch them on your feet and so on.
— Be careful not to drop the DR Detector on any part of
a person's body
— Install on a horizontal and stable surface.
CAUTION
• Contact Konica Minolta or dealers specified by Konica
Minolta to install or move this device.
• Take note of the following when installing or storing this
device.
— Install or store this device within the specified storage
and usage conditions and environment.
— Do not install or store in a location where it may be
adversely affected by atmospheric pressure, tem-
perature, humidity, ventilation, sunlight, dust, salt-air,
or air containing sulfur.
— Do not install or store in a location where it is not sta-
ble, ventilation is insufficient, the difference in light-
dark is great, electromagnetic waves are generated,
or where subject to vibration or shock.
— Do not install or store in a location where chemical
agents are used or stored.
— Do not install t his device facing up or upside down.