Konica Minolta AeroDR SKR 4000, Руководство по эксплуатации

Страница: 32 / 60

32
3�2 Operation of DR Detector
3�2�1 Exposure with basic
exposure
IMPORTANT
• When the battery runs down completely, all the LEDs of the
DR Detector go out.
• If the battery level is 0 %, exposure is not allowed.
• Confirm that the Battery LED (green) of the DR Detector
either lights or flashes when you perform exposure.
• The DR Detector is precision equipment, and therefore im-
pact or vibration during radiography or image transfer may
affect the image quality. Be careful when handling the DR
Detector during and just after radiography.
1
Perform examination registration with the
image processing controller�
2
Check that this device is ready to expose
images, and then prepare for the expo-
sure�
• Remove the DC Power Cable, if it is connected.
3
Push the exposure switch of the X-ray de-
vice to perform the exposure.
• When the exposure is completed, images are
stored in the DR Detector and will then be con-
verted to digital data and sent to the image pro-
cessing controller sequentially.
4
Check that the exposed image is dis-
played on the image processing control -
ler�
HINT
• When inserting the DR Detector to the wall stand or table,
an exposure operation can be performed with the DC Pow-
er Cable connected.
• Press the Power SW twice to enter the sleep mode.Press
the button again to wake up the device.
3�2�2 Exposure using Image
Storage
IMPORTANT
• The DR Detector is precision equipment, and therefore im-
pact or vibration during radiography or image transfer may
affect the image quality. Be careful when handling the DR
Detector during and just after radiography.
• Images exposed by Image Storage are not linked to any
patient information. Associate the exposed patient to the
number of exposures to record the exposures.
• If the number of images stored in Image Storage exceeds
200 during exposure, the oldest images will be deleted.
1
Turn on Image Storage mode of the image
processing controller�
2
Check that this device is ready to expose
images, and then prepare for the expo-
sure�
3
Push the exposure switch of the X-ray de-
vice to perform the exposure.
• After exposure, images are saved to DR Detec-
tor
4
Turn off Image Storage mode of the image
processing controller�
5
Import the images using the image pro -
cessing controller�