Konica Minolta 7255 Скачать руководство пользователя страница 74

Страница: 74 / 436

Positioning Originals (continued)

3-4

Positioning originals in Z-Folded original mode

Z-Folded original mode detects the folded original size without using the size
detection sensor of the RADF.

HINT

To use the Z-Folded original mode, see procedure on p. 8-10 to p. 8-11.

Arrange originals in order.

Position original(s) FACE UP in the document feeder tray.

Place two-sided originals with page one FACE UP.
Up to 100 originals can be set at a time.

Please Be Reminded!

• Before placing originals in the tray, be sure the document feeder is

closed fully. Once closed, do not open the document feeder, other-
wise the selected copy conditions may be altered automatically.

• Be sure not to use unsuitable RADF originals. See p. 11-8 for details.

Adjust paper guides.

Содержание 7255





















































































































































































































































































































































































































































Результаты поиска

Содержание 7255

Отзывы:

Бренды по названию

Популярные бренды

Konica Minolta 7255, Инструкция по эксплуатации

Результаты поиска

Содержание 7255

Отзывы:

Бренды по названию

Популярные бренды