Konica Minolta 7255, Инструкция по эксплуатации

Страница: 409 / 436

[13] Memory Switch Setting (continued)
13-41
Key Operator Mode Screen Memory Switch Setting Screen
Procedure
1
Touch
[13] Memory switch setting
on the Key Operator Mode Screen to
display the Memory Switch Setting Screen.
2
Use the procedure below to select the desired item and change the setting.
(1) Touch the arrow keys
c and d at the right on the Memory Switch Setting
Screen to select the desired item.
(2) Touch the arrow keys
?
and
@
at the lower left to scroll the screen.
(3) Touch
Change Setting Contents
to change the setting of the highlighted
item.
(4) Repeat above steps (1) to (3) to make several changes in succession.
3
Touch
RETURN
to restore the Key Operator Mode Screen.
4
If no further changes are required, touch
RETURN
to restore the Basic Screen
to perform copying operations.
The following functions can be provided by the Memory switch settings.
[1] Auto reset timer
Set the reset interval starting from the completion of a copying job until the machine
returns to the initial condition.
[2] AUTO RESET key function
Set the condition of the following modes when [
AUTO RESET
] is pressed; Copy
mode, Copy density, Magnification, Tray selection.
[3] RADF-Original effect
Set the machine condition when original is set on RADF in non-RADF mode with
RADF unit closed.
[4] Job memory auto recall (30)
Job memory No. 30 is automatically recalled when power is turned on or when Auto
Reset is restored.
This job recall function works only when Job No. 30 is registered.
[5] Finisher mode by AUTO RESET
Set the Finisher mode to be recalled when [
AUTO RESET
] is pressed.
Key Operator
Mode
Non-Image
Area Erase
Scan
Transmission
HDD
Management
Centring
Adjustment
Timing
Adjustment
Background
Adjustment
Finisher
Adjustment
Side 2 Lens
Adjustment
Call Remote
Centre
Machine
Management
List Print
Memory
Switch
Power Save
Setting
Tray Auto
Select Setting
Control Panel
Adjustment
Weekly
Timer
Key Operator
Data Setting
Panel Contrast/
Key Sound
Paper Type/
Special Size
Lock/Delete
Job Memory
E.K.C.
User Setting
Mode
Copier Initial
Setting
System Initial
Setting
Key Operator
Mode