Konica Minolta 7255, Инструкция по эксплуатации

Страница: 395 / 436

13-27
[9] Weekly Timer
This function can be accessed only by the Key Operator after a unique 4-
digit Weekly Timer master key code is entered.
The Weekly Timer is a copier management function that shuts down power
to the machine on a daily or hourly basis, and can be programmed
specifically for lunch breaks, weekends and holidays, or any time the copier
is not required.
In Addition, Timer Interrupt can be enabled (with or without a password
requirement) to allow temporary use of the machine during periods when
power is shut down by the Timer function.
Conditions required to use the Weekly Timer:
• The power plug is inserted into the socket.
• The power switch is turned on.
• The current date and time are correctly set.
If the Weekly Timer needs to be activated on your machine, contact your
service representative.
The following Weekly Timer settings can be made.
[1] Weekly timer ON/OFF setting
Enable and disable the Timer function.
[2] Timer Setting
Specify the times that the copier will turn ON and OFF for each day of the
week or the entire week.
[3] Timer action ON/OFF Setting
Specify the working days of the machine by the Timer, for all Mondays
through Sundays, and/or individually for each day of the given month.
[4] Lunch hour off setting
Specify the lunch time interval during which the copier will go off and on.
[5] Timer interrupt password set
Require Password entry for the Timer off function and establish the
amount of usage time.
NOTES:
1 The time is set in terms of the 24 hour clock, where hour [1] is the first
hour after midnight; and hour [24] is the hour of midnight. For
example, 6 a.m. is 06:00 hours; 6 p.m. is 18:00 hours.
2 The [
AUTO RESET
] key is used to change numbers determined by
the
SET
touch key.
Key Operator
Mode
Non-Image
Area Erase
Scan
Transmission
HDD
Management
Centring
Adjustment
Timing
Adjustment
Background
Adjustment
Finisher
Adjustment
Side 2 Lens
Adjustment
Call Remote
Centre
Machine
Management
List Print
Memory
Switch
Power Save
Setting
Tray Auto
Select Setting
Control Panel
Adjustment
Weekly
Timer
Key Operator
Data Setting
Panel Contrast/
Key Sound
Paper Type/
Special Size
Lock/Delete
Job Memory
E.K.C.
User Setting
Mode
Copier Initial
Setting
System Initial
Setting
Key Operator
Mode