Konica Minolta 7255, Инструкция по эксплуатации

Страница: 156 / 436

Troubleshooting Tips (continued)
5-16
THE BASIC SCREEN DOES NOT DISPLAY SETTINGS AS DESCRIBED
IN INSTRUCTION MANUAL
Check with the Key Operator, as Initial Settings may have been changed.
“PLEASE CHECK ORIGINAL”
This message displays when the copier detects a non-standard paper size
on the platen glass.
Select paper size and press [
START
]. 1.00 magnification will be selected
automatically.
If this message continues to display after selecting paper size, select 1.00
magnification, even if it is already indicated, then press [
START
]. If desired,
ask your service representative to enable the machine to default to 1.00
magnification in this situation.
SHEET INSERTION RESULT IS NOT AS EXPECTED
Blank insertion: Be sure manuscript originals do not already include blank
sheets in the locations designated for sheet insertion.
Copy insertion: To ensure that chapter sheets in 1-2 mode always appear
on the right hand side in the finished set, insertion sheets must be
designated on the page setting screen with odd numbers, not even. If
required, make an even numbered original page odd by inserting a blank
sheet in front of that page, so that the blank sheet is even and the insertion
sheet is odd.
FINISHER STAPLE RESULT IS NOT AS EXPECTED
The 2 staple position functions only on copy paper that is loaded vertically
(portrait style).
COPIES SKEW IN THE STAPLED SETS
Check to see if copy paper is excessively curled in the tray.
Reload the copy paper upside down.
USING PUNCH, COPIES CANNOT BE PUNCHED
Check to see if the message “Waste basket of Punching kit (unit) is full” is
displayed.
Empty the waste basket.
COPIES CANNOT BE STAPLED OR PUNCHED IN POSITION
Check to make sure the side guide plates are securely aligned to the copy
paper in the paper tray to be used.
Check to see if copy paper is excessively curled in the tray.
Reload the copy paper upside down.