Konica Minolta 7255, Инструкция по эксплуатации

Страница: 126 / 436

Checking Feature Selections and Proof Copying (continued)
3-56
Verify the settings made for the current job.
• When settings are OK, proceed to step
8
.
• When a set of sample copy is needed, proceed to step
6
.
• When making any setting change from the Check Screen, proceed to the
next step.
• When releasing any setting from the Check Screen, proceed to step
5
.
4.
To change the settings:
Touch the desired copying condition key on the Check Screen to highlight it.
Any key that cannot be highlighted indicates that the copying condition
cannot be changed from the Check Screen.
Touch
CHANGE SETTING
.
The LCD will display an appropriate screen to change the copying condition
selected.
FOR DETAILS
• Selecting a basic copying condition key will display the Basic Screen.
• Selecting
Enhance Mode
,
Special Orig.
, or
Original
key will display
the Special Original popup menu.
• Selecting an application function key will display the Change
Application Selection Screen.
When
BOOK MARK
has been checked on a subsequent screen,
selecting the application function key will jump to that screen. See p.
9-2 for details.
•
CHANGE SETTING
will not function for the following application
functions, however they can be released by touching
RELEASE
SETTING
: Non-Image Area Erase, Reverse Image, AUTO Layout,
Full-Image Area, Overlay.
Change the setting as desired, then restore the Check Screen to return to the
checking steps.
From the Basic Screen, press [
CHECK
] to return to the Check Screen.
From the Special Original popup menu or Change Application Selection
Screen, touch
OK
to return to the Check Screen.
• When making a set or sample copy, proceed to step
6
.
• To start printing without proofcopying, proceed to step
8
.