Konica Minolta 7255, Инструкция по эксплуатации

Страница: 111 / 436

3-41
Output Mode for Machine without Finisher
This section describes the output modes for a copier without the Finisher.
The Non-sort mode is initially selected.
1
Non-sort mode copies the original set in amounts determined by the
print quantity setting, then outputs sorted sets normally.
2
Rotation sort mode rotates every other sorted sets by 90° upon exit,
provided the same paper size is loaded in two trays, one tray with paper
loaded in portrait orientation and the other tray with paper loaded in
landscape orientation, e.g., A4 and A4R.
3
Group mode copies each original page in amounts determined by the
print quantity setting, then outputs grouped sets normally.
4
Rotation group mode rotates every other grouped set by 90° upon exit,
provided the same paper size is loaded in two trays, one tray with paper
loaded in portrait orientation and the other tray with paper loaded in
landscape orientation, e.g., A4 and A4R.
Using Face Up mode in combination with the above four modes, simplex
copies and odd numbered duplex copies exit face up on the exit tray.
3
2
1
Originals
Face down
rotation sort Face down
group Face down
rotation group
Face down
non-sort (default)
Face up
rotation sort Face up
group Face up
rotation group
Face up
non-sort
Example:
3-set copies
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Finisher
Output Mode
Binding
Mode
Shift Tray
Output Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode