Konica Minolta 7255, Инструкция по эксплуатации

Страница: 233 / 436

Inserting Images into Printed Sets (Image Insert) (continued)
9-21
9.
Scan the platen glass images.
Open the document feeder.
Position an original FACE DOWN on the platen glass, then close the
document feeder.
Please Be Reminded!
PLACE AND SCAN THE ORIGINALS ACCORDING TO PAGINATION.
10.
Press [ START ].
11.
Repeat steps 9 and 10 for all originals.
HINTS
• Memory overflow may occur during scanning. See p. 5-11 to p. 5-12.
• Should memory overflow occur frequently, it is recommended that
you contact your service representative to extend the memory
capacity in your machine.
12.
Touch STORE to exit the Store mode.
13.
Press [ START ].
The copier will start printing when ready for output.
CAUTION
When the finisher / shift tray / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.
FOR DETAILS: Entering Page Numbers
For example, if insertion locations are [2/2/6], scanned platen images
will be inserted as follows:
The first scanned platen image will be inserted after page 2.
The second scanned platen image will be inserted directly after the first
scanned Image insertion.
The third scanned platen image will be inserted after page 6.
NOTES:
• When a page number is larger than the total original count, a sheet is
inserted as the last page.
• Insertions occur in sequence, even if page numbers are entered out
of sequence.
• Entering the same page number twice will insert two sheets at that
location.
Applications
Reverse
Image
Non-Image
Area Erase
Program Job
Dual Page
Image Insert
OHP
Interleave
Booklet
Combination
Chapter
Sheet/Cover
Insertion
Application
Selection Screen
Repeat
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory